KEY MESSAGE:
NOAA Fisheries announces new modifications to sea turtle release gear for the reef fish fishery in the Gulf of Mexico (Gulf). These modifications include three newly approved sea turtle release devices, and clarification to regulations to specify exactly which release gear is required and approved for use, including dimensions where appropriate.
WHEN RULE WILL TAKE EFFECT:
- Regulations will be effective June 17, 2019
SUMMARY OF CHANGES:
- A collapsible hoop net and small turtle hoist are approved as alternatives to the dip net requirement.
- A new squeeze handle dehooker is approved to fulfill the requirement for a short-handled dehooker for external hooks.
- The use of 316L and 304L grade stainless steel for internal and external device construction are approved for other short-handled and long-handled dehookers.
- There is no longer a requirement for the end coverings on canine mouth gags.
- The minimum blade length for the monofilament line cutters is 1 inch with a minimum total length of 6 inches.
- The minimum total length for the long-nose, needle-nose pliers is 11 inches.
- The minimum blade length for the bolt cutters is 4 inches with a minimum total length of 14 inches.
- The specific length for the hank of rope, used as a mouth opener/gag, has been removed.
- The block of hard wood, used as a mouth opener/gag, dimensions must be a minimum of 10 inch x ¾ inch x ¾ inch.
- The requirement for a sea turtle cushion or support device was updated to specify a dedicated cushion for the turtle must be on board, which cannot be also used as a personal flotation device.
- An electronic version of the document entitled “Careful Release Protocols for Sea Turtle Release with Minimal Injury” kept on an electronic device is now allowed on board a vessel instead of a written copy.
FORMAL FEDERAL REGISTER NAME/NUMBER: FR 84 FR 22383, published May 17, 2019.
This bulletin serves as a Small Entity Compliance Guide, complying with section 212 of the Small Business Regulatory Enforcement Fairness Act of 1996.
FREQUENTLY ASKED QUESTIONS (FAQs)
Why are new sea turtle release devices being added to federal regulations?
- Vessels with commercial or for-hire federal reef fish permits are required to have gear on board to allow for safe release of incidentally caught sea turtles.
- The Southeast Fisheries Science Center regularly tests and approves new sea turtle release devices that meet the requirements. However, the devices must be added to regulations before they can be used by federal permit holders to satisfy the regulatory requirements.
- These changes listed in the final rule provide additional flexibility to meet the requirements for participants in the commercial sector and for-hire component of the reef fish fishery.
Are these new gear and gear clarifications valid for South Atlantic Snapper-Grouper permit holders?
- No, currently the South Atlantic Fishery Management Council is in the process of updating the Fishery Management Plan for the Snapper Grouper resource under Amendment 42. If that rule is approved and effective, these changes would also apply in the South Atlantic. Currently, the new regulations only pertain to Gulf reef fish permit holders and regulations found at 50 CFR Part 622 Appendix F accurately reflect this.
- Snapper Grouper Amendment 42 may be found online at the NOAA Fisheries Southeast Regional Office Website at https://www.fisheries.noaa.gov/action/amendment-42-modifications-sea-turtle-release-gear-and-framework-procedure-snapper-grouper.
What are the sea turtles and smalltooth sawfish release protocol requirements for the Gulf reef fish fishery?
- Vessels with commercial and/or for-hire federal reef fish permits are required to have the proper sea turtle release gear in accordance with their vessel freeboard height.
- Vessels also must possess onboard a copy of the most recent version of the document entitled “Careful Release Protocols for Sea Turtle Release with Minimal Injury” (Protocol), and the Placard for sea turtle handling and release guidelines.
- The Protocol must be onboard and available for reference inside the wheelhouse, or within a waterproof case if the vessel has no wheelhouse.
- The Placard must be posted at all times inside the wheelhouse, or within an easily viewable area if the vessel has no wheelhouse.
How do I measure the freeboard to tell if it is greater or less than four feet?
- Freeboard is defined as the working distance between the top rail of the gunwale to the water's surface, and will vary based on the vessel design.
What release gear are currently required for federally permitted vessels in the Gulf reef fish fishery?
- A federally permitted vessel with a freeboard height equal to four feet or less must have on board a:
- Dip net (handle must be 6 feet or 150% of freeboard height, whichever is greater)
- A collapsible hoop net or small turtle hoist can be used in place of the dip net
- Dedicated cushioned support device*
- Short handled dehooker for internal hooks
- Short-handled dehooker for external hooks
- Long-nose or needle-nose pliers
- Bolt cutter
- Monofilament line cutter
- At least two types of mouth openers/mouth gags
- Dip net (handle must be 6 feet or 150% of freeboard height, whichever is greater)
- A federally permitted vessel with a freeboard height of greater than four feet must have on board a:
- Long-handled line cutter (handle must be 6 feet or 150% of freeboard height, whichever is greater)
- Long-handled dehooker for internal hooks (handle must be 6 feet or 150% of freeboard height, whichever is greater)
- Long-handled device to pull an “inverted V” (handle must be 6 feet or 150% of freeboard height, whichever is greater)
- Dipnet (handle must be 6 feet or 150% of freeboard height, whichever is greater)
- A collapsible hoop net or small turtle hoist can be used in place of the dip net
- Dedicated cushioned support device*
- Short-handled dehooker for internal hooks
- Short-handled dehooker for external hooks
- Long-nose or needle-nose pliers
- Bolt cutter
- Monofilament line cutter
- At least two types of mouth openers/mouth gags
*A cushioned support device is an auto tire or any other comparable, cushioned, elevated surface that allows boated sea turtles to be immobilized as specified in 50 CFR Part 622 Appendix F. Alternatives to tires include dedicated life rings, seat cushions, life jackets, and life vests; which must be in addition to those required for safety.
Where can I find more information on Reef Fish Amendment 49?
- Reef Fish Amendment 49 may be found online at the NOAA Fisheries Southeast Regional Office Website at https://www.fisheries.noaa.gov/action/amendment-49-modify-sea-turtle-release-gear-and-reef-fish-framework-procedure.
- Contact NOAA Fisheries, Southeast Regional Office
By Mail: Kelli O’Donnell
NOAA Fisheries, Southeast Regional Office
Sustainable Fisheries Division
263 13th Avenue South
St. Petersburg, Florida 33701-5505
By FAX: (727) 824-5308
By Phone: (727) 824-5305
- More information on sea turtle release protocols may be found online at the NOAA Fisheries Southeast Regional Office Website at: https://www.fisheries.noaa.gov/southeast/sea-turtle-and-smalltooth-sawfish-release-gear-and-protocols.
SIGN UP FOR TEXT MESSAGE ALERTS - FIND OUT ABOUT IMMEDIATE OPENINGS AND CLOSURES
NOAA's Text Message Alert Program allows you to receive important fishery related alerts via text message (SMS). Standard message & data rates may apply. You may opt-out at any time.
Text alerts you may receive include:
- Immediate fishery openings and closures
- Any significant changes to fishing regulations that happen quickly
Sign up for one or more of the following groups:
- Gulf of Mexico Recreational Fisheries Related Alerts
- Text GULFRECFISH to 888777
- Gulf of Mexico Commercial Fisheries Related Alerts
- Text GULFCOMMFISH to 888777
- South Atlantic Recreational Fisheries Related Alerts
- Text SATLRECFISH to 888777
- South Atlantic Commercial Fisheries Related Alerts
- Text SATLCOMMFISH to 888777
- Caribbean Fisheries Related Alerts
- Text CARIBFISH to 888777
Join us every other Friday on NOAA Fish Instagram for Rec Fish Friday!
Other contacts:
Media: Kim Amendola, 727-551-5707
Allison Garrett, 727-551-5750